Procedures of copying ID68  (P1 :32) by CN2 via CN900  

1.First put the original key with transponder chip ID68 （P1 :32）in the testing 

hole and press Identify & Copy button. Then you will see the data as follow:  

2.Remove original key from testing hole and put CN 2 chip in the hole,  Press  

Copy button.  

3.After press Copy button the screen will showing the data as follow. After appear 

Success then meant the copy  finish successfully.  

4. To test the copy is successful or not .    

Keep the CN2 in the hole and press Back and then press Identify & Copy. Wait for 

few seconds then will see CN2 data same as original key ID ID68 （P1 :32）.So the 

copy is successful.  

http://mbstarseries.webs.com/