Here CnAutotool.com will show you how use KTAG Master to read Peugeot Boxer ECU Visteon DCU-102 (FOCOMO) in boot mode step by step!
ECU Type:
Visteon DCU-102 sometimes called FOMOCO.
Same unit and procedure applies to PSA, Ford and Fiat vans. In this case car is a Peugeot Boxer. No resistors required.
Tool you need:
K-TAG read ECU Visteon DCU-102 procedure:
Step1. Take out the ECU unit and heat the unit edges to open it safely.
Step2. Connect ECU with KTAG according to following pin out diagram:
Step3. Connect KTAG with computer then open ksuite software. Click the car icon and choose “Peugeot” and “Boxer III”. Then choose ECU: Visteon DCU102 KW 74 HP 11.
Step4. Click “Read” to start.
Wait the process complete to 100% and KTAG ECU Programmer read ECU Visteon DCU102 successfully! Now you can save the bin file.
