In the current market of plastic machinery, die-casting manipulators are very diverse and difficult to choose. And die-casting manipulators are not easily classified and evaluated. Different axes, Die casting itineraries, inconsistent specifications, and limited industrial standards make it difficult to purchase mechanical hands. However, by understanding the basics, we can still make the right choice for the dongguan manipulator.

　　Choose the right itinerary

　　The so-called journey is the distance of the manipulator, which is related to the size of the parts, the position of the descent and the shape of the machine. Generally speaking,Multi slider die casting machine the stroke of the die-casting manipulator is usually defined on three axes, namely X, Y and Z axis. It is important to note that not all robot-makers define their trips in this way. The methods and naming conventions vary from vendor to vendor.

　　The X axis. The distance that the die-casting manipulator runs is usually called recoil travel, and its size is related to the thickness of the part. For example, die casting machine in order to manipulate a bucket, the process is to extend the manipulator and pull the bucket out of the mold, which requires the die-casting manipulator to have enough X - axis travel.

　　The Y axis. This distance is defined as a vertical stroke, which is determined by the height of the machine and the height required. In other words, the die-casting manipulator must have sufficient height to allow the component to skip the machine,zinc die casting and to be able to descend enough to allow the dongguan manipulator to drop the parts at a reasonable height.

　　The Z axis. According to the machine side or the machine, the manipulator shall operate to determine the travel of the manipulator. This trip determines whether the parts can be made over the machine.

　　Generally speaking, the easiest way to determine the required schedule is to draw a map of the device. The distribution diagram not only can determine each stroke, but also can identify some special concerns, such as auxiliary equipment, support column and gap area, in the plan diagram of the plane.

　　Weight of injection molded parts

　　The payload is the weight that the die-casting manipulator can handle, which is equal to the weight of the component and the weight of the arm end tool. So when purchasing manipulator should estimate the components of this manipulator is likely to operate the maximum weight, and from dongguan manipulator suppliers to get the weight of the arm end tools, calculate the payload.