Bybit Referral Code BTC9149 | Signup & KYC Guide | 58% Off | Nov 2026

Contents

1. Three things to prepare first
2. Four-step signup: where the code goes
3. Three KYC levels, and which one you need
4. Standard verification in five actions
5. Six details that get you approved
6. Four rejection causes and fixes
7. Three settings to change right after KYC
8. Fees and how the 58% discount stacks
9. Four beginner mistakes

1. Three things to prepare first

The flow is short, but if you start hunting for your ID halfway through, the referral code field is what gets skipped. Have these ready first:

An email address you actually read. Use a mailbox you have had for years and that is tied to your phone number. Login codes, withdrawal confirmations, and KYC results all land there; a throwaway address cuts off your own recovery path.

A unique password. Eight-plus characters with mixed case, numbers, and a symbol, not reused elsewhere. Credential stuffing is still the top way exchange accounts get taken over, and this habit beats any security toggle.

A valid government-issued ID, physical original. Passport, national ID, driver's license, or residence permit. What matters is the original — screenshots, photocopies, and photos of a screen are rejected, and visa documents are usually not accepted.

---

2. Four-step signup: where the code goes

There are only four actions, and step one decides everything. A referral code is a one-time binding at account creation and cannot be changed or moved to another account later, so slow down and confirm the discount banner appears before you continue.

Step 1: open the signup page through the referral link. The link pre-fills the code, which beats typing it by hand. This guide uses https://partner.bybit.com/b/BTC9149, and the page should confirm your offer on load. No discount message at all? Check the link before creating the account. Registering in the app instead? Type BTC9149 into the code field.

Step 2: enter email and password. Use the mailbox and password you prepared. Some accounts get an extra slider or image puzzle; just complete it as shown.

Step 3: enter the email code. A six-digit code arrives and stays valid for a short window. If it is missing, check spam once — resending in a loop can lock you out temporarily.

Step 4: confirm the discount is live. Open your account or rewards page and check the fee discount status. This is the step people skip, and it is the only proof that the code actually attached.

---

3. Three KYC levels, and which one you need

Bybit splits individual verification into three tiers, and not everyone needs the top one. Check what each requires and unlocks before deciding.

Level	What you submit	What it unlocks	Who needs it
Standard	Government ID plus a live face scan; some accounts also get an identity assessment questionnaire	Deposits, spot and derivatives trading, P2P, withdrawals	Nearly every retail user
Advanced	Standard plus proof of address dated within three months — utility bill, bank statement, government letter	Higher withdrawal limits, certain fiat and card services	Larger balances, fiat on-ramp users
Pro	Advanced plus source-of-funds details, financial questionnaire, enhanced due diligence	Highest limits and dedicated services	High-volume or institutional users

In practice, standard verification covers nine out of ten everyday tasks: buying coins, opening perps, running grids, copy trading. You only hit a wall when moving serious size or needing fiat rails and the debit card. Limits per tier depend on region and platform rules, so trust the number on the verification page in the app, not a third-party figure.

---

4. Standard verification in five actions

Do it all inside the mobile app; photo capture and the face scan flow far better than scanning a QR code from a laptop.

1. Find the entry point. Tap your profile icon, open Identity Verification, choose Standard (individual), and start.

2. Pick residence and document type. Choose where you actually live — it drives the verification path — then pick the document easiest for you to photograph clearly.

3. Photograph both sides. Lay the document flat on a dark surface with all four corners in frame and no finger covering an edge. A passport needs only the data page. Keep the flash off; glare is the single most common rejection cause.

4. Complete the face scan. Remove glasses, hat, and mask, face a light source, and follow the prompts to blink or turn your head. No one walking behind you, and no window backlighting.

5. Wait for the result. Most submissions are auto-reviewed in minutes to a few hours, and the outcome arrives by email. Cases pushed to manual review can take one to three business days.

---

5. Six details that get you approved

Rejections are almost never about who you are, only about the photo or the light. Get these six right:

Use the original, never a screenshot. Photos of a screen, photocopies, scans, or anything with a filter is treated as a non-original document.

Even light, no backlight. Daylight near a window is the safest setup. At night, use two lamps from the sides so your own shadow does not cover the text.

Four corners, readable text. Trimming a sliver off the edge looks minor to you and fails the reader every time.

Match name and birth date exactly. Spelling, order, and middle names must line up with the document.

No VPN or proxy. Switching network environments or hopping IPs mid-verification reads as risk behavior. Finish on home or mobile data.

Do not edit the photo. Cropping, smoothing, or contrast tweaks can get the file flagged as altered and rejected outright.

---

6. Four rejection causes and fixes

A rejection email states the reason, and most people resubmit the same photo without reading it — then get rejected again. Work through the table below and the second attempt usually clears.

Reason	What went wrong	Fix
Blurry or glare	Focus missed, or a lamp reflecting off the surface	Switch to daylight, tap to focus, confirm the text is sharp before submitting
Information mismatch	Romanization, middle name, or birth date differs from the document	Correct the account details character by character, then resubmit
Expired or unsupported document	The ID has expired, or a visa-type document was sent	Use a currently valid passport or national ID
Face match failed	Glasses on, poor light, big gap between ID photo and current appearance	Take accessories off, face the light, redo the liveness check once

---

7. Three settings to change right after KYC

Passing KYC means you can deposit and trade. It does not mean your account is protected. Set these three the same day:

Two-factor authentication. Bind an authenticator app rather than SMS. Text messages can be intercepted; the authenticator cannot.

Anti-phishing code. Once set, every genuine email from Bybit carries your own alphanumeric string. Any "official notice" without it is phishing, no further analysis needed.

Withdrawal address whitelist. With the whitelist on, funds can only leave to approved addresses. Even a stolen password cannot move your assets. The cost is a cooldown whenever you add an address, and that is a fair trade.

---

8. Fees and how the 58% discount stacks

Baseline first: at the entry tier spot is about 0.10% maker and taker, USDT perps roughly 0.02% maker and 0.055% taker. Numbers move with VIP level and 30-day volume, so the fee page is the source of truth. Perps also carry a funding rate settled every eight hours — that money moves between longs and shorts, not to the platform.

The discount stacks in two steps, and the order matters:

Step one: bind the code. Enter BTC9149 at signup for 33% off trading fees. Nothing else to apply for — it is attached the moment the account is created.

Step two: turn on MNT fee deduction. Enable MNT fee payment in your fee settings. Combined with the code, the two stack to up to 58% off trading fees. You need some MNT in the account — not much, but it cannot be locked up in open orders.

Step three: verify the actual charge. After your first fill, compare the fee in trade history against the discounted figure on the fee page. Only trade history is real; a banner percentage is not.

---

9. Four beginner mistakes

Registering first and adding the code later. The binding is a one-time event at account creation. The retrofit window is short, and missing it means losing the discount permanently. This is the mistake that costs the most people the most money.

Assuming KYC equals security. Verification is a compliance requirement. What actually stops theft is 2FA, the anti-phishing code, and the withdrawal whitelist. Without those three, KYC does nothing for your assets.

Paying someone to verify for you. Handing over your ID and your face means handing over the account. Once activity is flagged as not belonging to the account holder, funds can be frozen with no appeal route.

Going straight for the highest tier. Advanced and Pro demand proof of address and even source-of-funds paperwork, with little upside for a retail trader. Stay on standard, and upgrade only when you actually hit a limit.

---

FAQ

Bottom line

Signing up and verifying on Bybit is not technically hard; the difficulty is sequence. Have the ID and mailbox ready, enter through the referral link with BTC9149 in step one, run standard verification in one sitting, then add 2FA and the withdrawal whitelist. Half an hour, and it sets the cost of every trade after.

Not registered yet? Start here and the code fills in automatically:
https://partner.bybit.com/b/BTC9149　|　Code: BTC9149