Contents ...
LM75 Temperature Sensor Module
2020/05/20 12:37

This LM75 Temperature Sensor Module is specifically made to the Banana Pi however it may also be made use of together with the Arduino. This module employs the NXP LM75 Temperature IC. The LM75 temperature sensor contains a delta-sigma analog-to-digital converter and also a electronic over-temperature detector.

LM75 Temperature Sensor Module Attributes & Specifications

Operating Voltage: 3.3V to 5V DC

Range: -25??C~125??C

LM75 based design

Low Operating Supply Current: 250|¨¬A

I2C Bus Interface

Easy to use with Microcontrollers or even with normal Digital/Analog IC

Small, cheap and easily available

Alternate Sensor Modules: IR Sensor Module, LDR Sensor Module, TP4056A Module, DS3231 RTC Module, TMC2209 Stepper Motor Driver Module, DRV8825 Stepper Motor Driver Module, A4988 Stepper Motor Driver Module, NEO-6MV2 GPS Module, Joystick Module, EM18 - RFID Reader Module, ADXL335 Accelerometer Module, HMC5883L Magnetometer Module, Soil Moisture Sensor

Related Components: LM75 IC, Capacitor, Resistor

Brief about the LM75 Temperature Sensor Module

Introducing uart wifi moduleInterface from Heisener.Visit our website to compare between a wide range of remarkable models. Order your perfect match right now!

This LM75 Temperature Sensor module consists of an LM75 IC, resistors, capacitor, Power LED in an integrated circuit. Temperatures sensing range for this module is from?25??C to +125??C

LM75x Electronic Temperature Sensor IC

The LM75 is an industry-standard digital temperature sensor with an integrated Sigma-Delta analog-to-digital converter and I2C interface. The LM75 provides 9-bit electronic temperature readings with an accuracy of ?¨¤2??C from -25??C to 100??C and ?¨¤3??C over ¡§C55??C to 125??C.

How to Use the LM75 Temperature Sensor Module

LM75 Temperature Sensor Module consists of five pins i.e. VCC, GND, OS, SCL, and SDA. This module is pin-compatible with Banana Pi so you can directly mount it on Banana Pi. The internal circuit diagram of this module is given below. SCL and SDA pins are connected through 4.7K ohm pull-up resistors.

Applications of LM75 Temperature Sensor Module

Industrial controllers

Environmental monitoring

Smart home

Interactive devices

Related links:

Updating the firmware in an ESP8266 Wi-Fi module can be frustrating! Heres a procedure to reduce the pain.

ESP-12E - WiFi Module

ESP Alarm: Make an IoT, Wi-Fi Enabled Alarm Clock with an ESP8266 and Arduino UNO

The Current and Future Advantages of Using Wi-Fi Modules in IoT Designs

Integration of Wi-Fi mobile nodes in a Web of Things Testbed