Contents ...
udn網路城邦
Nov 2026 Bybit Referral Code BTC9149 | TP/SL Feature Guide | Up to 58% Off
2026/11/21 20:26
瀏覽3
迴響0
推薦0
引用0

Nov 2026 Bybit Referral Code BTC9149 | TP/SL Feature Guide | Up to 58% Off

This post skips the "should you use it" debate and explains how the feature works: what each of the five setup entry points can do, how the three trigger types differ, why four exit methods produce different results, how to set three partial take-profits and auto-move the stop to breakeven, why spot and futures differ, and the five most common setup mistakes. Sign up with Referral Code BTC9149 for a 33% fee discount, and stack MNT fee payment on top for up to 58% off.

Bybit Referral Code

BTC9149

https://partner.bybit.com/b/BTC9149

Table of Contents

  1. Five Entry Points, Five Different Scopes
  2. Three Trigger Types and How They Differ
  3. Four Exit Methods, Very Different Results
  4. Partial Take-Profit and Auto Breakeven
  5. Spot and Futures Follow Different Rules
  6. Modify, Cancel, and Portfolio-Level TP/SL
  7. Five Common Setup Mistakes
  8. FAQ
  9. Risk Warning
  10. Conclusion

Five Entry Points, Five Different Scopes

TP/SL is not set in one place. Bybit offers five: the order zone (attach it while opening), the TP/SL column on the Positions tab (tap "+ Add" on an existing position — the one you will use most), open limit and conditional orders (pencil icon), the TP/SL tab under Open Orders, and All Futures TP/SL (portfolio-level, triggered by cumulative P&L).

The entry point also decides permissions. Key rule: pending or untriggered orders do not support multiple TP/SL orders — only active positions do. To scale out, wait until the position fills and set them from the Positions tab.


Three Trigger Types and How They Differ

One order can describe "when to trigger" three ways. By change (%) fires when price moves a set percentage from entry — independent of leverage. By ROI (%) is tied to leverage: at 10x, ROI 20% equals a 2% move; at 20x it equals 1%, so changing leverage silently moves your trigger price. By P&L takes a fixed amount such as +500 or −300 USDT — easy, but recalculate whenever position size changes.

Practical advice: use change (%) for stop-losses — it describes market behavior and will not quietly tighten when you raise leverage later. The reference-price field offers last, mark, and index price; prefer mark price for stops so a brief wick does not take you out.


Four Exit Methods, Very Different Results

A trigger only starts the process; the exit method decides the outcome. Market fills immediately at the best available price — fastest, but no price guarantee, and volatile conditions can slip several ticks. Limit rests a close order at your chosen price (both trigger and limit price required): price controlled, execution not, and the market can jump straight past it. Slippage limit sets a maximum acceptable slippage, filling inside that band and cancelling outside it. Best bid/ask rests at the counterparty's best quote when triggered, which suits liquid majors.

Two rules: entire-position TP/SL always executes at market, no alternative; and limit stop-losses can fail completely in fast markets. A stop means "I must get out" — a limit order makes that a maybe. Use market or slippage limit for stops, limit for take-profits.


Partial Take-Profit and Auto Breakeven

Two modes exist. Entire position is one order covering everything; partial position lets you stack several orders on one position, each with its own quantity, trigger price, and exit method. Example: on a 0.3 BTC long, place 40% at +3%, 40% at +6%, and leave the last 20% to a trailing stop — you bank something at the first target and stay in if the move continues.

Partial mode has a useful toggle: "Set SL at entry price after TP is filled." Once the first take-profit fills, a market stop is placed at your entry — the simplest route to breakeven (available only with Market exit). Note that in entire-position mode TP and SL are mutually exclusive, so triggering one cancels the other; partial orders stay independent.


Spot and Futures Follow Different Rules

ItemSpot TP/SLFutures TP/SL
Where to setOrder zone, or preset with a limit orderOrder zone, Positions tab, open orders
Reference priceLast price onlyLast, mark, or index price
Trigger typesTrigger price, change, P&LAdds ROI (%)
Asset reservationReserved the moment the order is placedNot reserved until triggered

The overlooked row is asset reservation. A direct spot TP/SL locks the coin or funds immediately — fundamentally different from a conditional order, which reserves nothing until triggered. If you plan with conditional orders out of habit, do not mix the two or you will hit "I have a balance but cannot place an order".


Modify, Cancel, and Portfolio-Level TP/SL

To modify: the pencil in the open-orders list, the pencil in the Positions tab TP/SL column, or Add/Modify under Partial Position. To cancel: the TP/SL tab, order by order or all at once, or the eraser icon in order details. One mindset shift: modifying an order is placing a new one — no queue priority carries over. Do not nudge a stop repeatedly; walking it from −3% to −2% is not optimizing risk, it is cancelling it.

All Futures TP/SL ignores individual positions and watches cumulative P&L, closing everything at market once the level is hit. It suits traders running several pairs who want portfolio-level control; the cost is that it exits everything regardless of direction, including profitable positions.


Five Common Setup Mistakes

One: a stop beyond the liquidation price. It must fire earlier than liquidation — well above it on a long, well below on a short, or it is decoration. Two: take-profit too close for fees. Charged both ways; a 0.3% target against 0.2% in fees nets under 0.1%. Three: limit stop-losses. On a gap the order sits unfilled while the position stays open. Four: last price as the stop reference. A wick triggers it while mark price never broke. Five: not rechecking after adding size. An entire-position order follows the new size but not the price, so the stop and new liquidation level may no longer make sense together.

On cost: a triggered TP/SL is an ordinary fill — market exits pay taker fees, limit exits pay maker fees. To lower that, enter Referral Code BTC9149 at signup for a 33% fee discount, then switch on MNT fee payment to stack up to 58% off. The gap matters most on trades with 1–2% targets. Sign-up link: https://partner.bybit.com/b/BTC9149


FAQ

Q1: What is the Bybit Referral Code BTC9149?

A referral code identifies the inviter in the exchange's referral program. Entering BTC9149 at signup binds your account to the referrer and gives you a 33% fee discount; enabling MNT fee payment stacks it to as much as 58% off. It is an official field in the signup flow, changes no account functionality, and can only be entered during signup.

Q2: How much does skipping the code cost?

On a 0.1% base spot rate: about 0.067% with the code, roughly 0.042% with MNT stacking. On 100,000 USDT of annual volume that is about 100 USDT without the code versus about 42 USDT with the full discount. The more often your TP/SL triggers, the more times that gap is charged.

Q3: How should a beginner set the first TP/SL?

Three rules: define the stop first and size the position from it; use change (%) with mark price and exit at market or with a slippage limit; leave at least twice the stop distance on the profit side so fees are not your biggest cost. Run the flow once with a minimum position to see a real stop-out.

Risk Warning

Cryptocurrency prices are highly volatile and trading can result in the loss of your principal; futures and margin are high-risk products that beginners should avoid or approach only with minimal size. TP/SL is a conditional order — once triggered it may still fail to fill or fill with slippage, so it is not a capital-protection tool. Fees and feature details may change under official rules; what currently displays on the platform governs. This post is not investment advice.


Conclusion

TP/SL is not complicated; what takes thought is each field's consequence. The entry point decides how many orders you can place, the trigger type whether risk shifts when you change leverage, the exit method whether your stop actually exits, partial take-profits whether you can bank and ride at once, and the spot-versus-futures difference whether assets get locked at order time. To lower the cost side first, register at https://partner.bybit.com/b/BTC9149 with Referral Code BTC9149 for a 33% fee discount, and enable MNT fee payment to stack up to 58% off.


限會員,要發表迴響,請先登入