Contents ...
udn網路城邦
Bitget Reverse Guide: Don't Sign Up Yet — Read These 6 Pitfalls First (November 2026 Edition)
2026/11/10 17:50
瀏覽4
迴響0
推薦0
引用0
Most tutorials tell you to "sign up first, figure it out later." This one goes the opposite way. Signing up on Bitget takes 3 minutes, but a few pitfalls only become obvious after registration — and some of them have no undo button. Let's cover them thoroughly first, so when you finally enter the referral code, you get it right in one pass.

Referral Code: BGOfficial
Sign-up Link: https://partner.bitget.com/bg/BGOfficial
Core Benefit: Sign up through this link to get 20% off trading fees

1. Three Things to Settle Before You Register (Get These Wrong and There's No Going Back)

Pitfall 1: The referral code wasn't entered — or was entered wrong — and the discount is gone

This is the only pitfall that's truly irreversible. Bitget's fee discount is bound at registration. Trying to fix it afterward means contacting support and rolling the dice; most people don't get it sorted.

There's exactly one correct move: on the sign-up page, confirm the referral code field shows BGOfficial before you hit submit. Don't rush the copy-paste — the link carries the code, but if the page redirects once or you manually edit the URL, the code can get dropped.

One sentence to remember: check the code first, then register. Only proceed once the confirmation field shows BGOfficial.

Pitfall 2: Landing on the wrong site

Search "Bitget" and you'll get a pile of sites — the top one may be an ad. Only trust the official domain bitget.com, or just use the sign-up link in this article. Before entering anything, glance at the address bar for the padlock icon. Don't type your email and password into a fake site — the cost of that pitfall isn't fees, it's your principal.

Pitfall 3: Using a throwaway email

Use an email you actually rely on (Gmail, Outlook, and the like) — not an obscure provider. The reason is practical: verification codes, login alerts, and password recovery all depend on that inbox. Niche email services often get verification mail blocked by filters, leaving you stuck mid-registration.

2. Three Things to Do Immediately After Registering

1. Finish security setup before touching money

Order matters. Plenty of people rush to deposit right after signing up and push security setup to "later" — then forget. The correct order:

  • Google Authenticator: bind it. Far more reliable than SMS, which in some regions is vulnerable to SIM-swap attacks. After scanning the QR code, write the backup key down on paper.
  • Set a funding password: required for withdrawals, separate from your login password.
  • Anti-phishing code: pick a code only you know. Every legitimate email from Bitget will include it — any "official email" without it is phishing.

2. Complete KYC at the highest tier available

L1 identity verification only needs basic documents, but withdrawal limits and certain features stay restricted. Do it once, do it fully — so you're not stuck mid-trade later waiting for re-review. Prepare: clear ID photos, face verification in good lighting. Pass in one go.

3. Confirm the discount is actually live

Within 24 hours of registering, go to Profile → Fees and check whether your spot and futures rates show the 20% reduction (comparison numbers in Section 4 below). Once confirmed, the registration has truly "landed."

3. Deposits: Picking the Wrong Network Is the Most Expensive Lesson

Depositing on the wrong network means slow arrival and high fees at best — permanent loss at worst. The rules are actually simple:

What you're depositingNetwork to chooseNever choose
USDT (large amounts, to save on fees)TRC-20—
USDT (exchange-to-exchange transfer)Whatever the sending exchange supports—
ETHERC-20 or a supported Layer 2Wrong choice = lost funds
BTCBitcoin native network (BTC)Not any other chain
Core rule: before depositing, check which networks the sending side (your previous stop) supports, then select the same one here. Both sides must match — a mismatch means permanent loss, and support can't recover it.

For your first deposit, send a small test amount (say 10–20 USDT), confirm it arrives, then send the rest. Ten minutes of patience is worth it.

4. The 20% Fee Discount — How Much Does It Actually Save You?

Bitget's standard rates versus the discounted ones (this is the most tangible value of this referral code):

MarketStandard (Maker / Taker)After 20% off
Spot0.100% / 0.100%0.080% / 0.080%
Futures0.020% / 0.060%0.016% / 0.048%

The numbers look tiny, so here's another angle: suppose your monthly futures volume is 100,000 USDT, all in market orders (Taker) —

  • No discount: 100,000 × 0.060% = 60 USDT/month
  • With discount: 100,000 × 0.048% = 48 USDT/month
  • 144 USDT saved per year — and the more you trade, the more you save
One detail worth noting: this perk is a "discount at signup," reflected directly in your rates — unlike rebates, which settle at month-end. Less hassle for you: no wondering when the rebate lands.

5. What Bitget Is Actually Great At: Don't Forget to Use It

1. Demo Trading — a free training ground

Bitget's demo trading is generous: virtual funds on signup, powered by real market data. The most common beginner mistake is "I know the rules, straight to live trading." The point of the demo is to drill order placement, take-profit/stop-loss, and closing — without real money on the line. Spend at least a week there first.

2. Futures Copy Trading — a double-edged sword, sharp when used right

Bitget's futures copy trading is the most famous in the industry: you can mirror top traders' positions directly. But two honest warnings:

  • Copy trading ≠ guaranteed profit. Past performance doesn't guarantee the future. Pick traders by max drawdown and trading style, not just the ROI leaderboard.
  • Always set your own stop-loss. The copy trading tool has a "copy stop-loss percentage" — don't skip it on first setup. It's your only fuse.

3. Bitget Earn — don't let idle funds sit still

Stablecoins (USDT/USDC) sitting untouched in your account can go into Earn for interest. The flexible-term yield isn't high, but it beats zero. One rule: stablecoins only — don't park your futures margin in there, or you won't be able to withdraw when you need it.

6. Five FAQs, Answered Once and For All

Q1: I registered and only then realized the referral code wasn't entered. Now what?
Contact live chat support and request a retroactive binding — but be mentally prepared that it may not work. That's why checking the confirmation field before registering beats any after-the-fact fix by a mile.

Q2: Is the 20% discount permanent?
The discount from a referral-link signup is a long-term account benefit, not a limited-time promo. That said, Bitget's policy can change — the Fees page on your account is the final word.

Q3: Does the discount cover both spot and futures?
Yes. Both spot and futures fees are 20% off the standard rate (see the table in Section 4).

Q4: I'm a total beginner — spot or futures first?
Spot. Futures come with built-in leverage; avoid them for your first month while you get comfortable with buying, limit orders, and transfers. Want the leverage feel? Use the demo — it costs nothing.

Q5: Any difference between the mobile app and the web version?
Features are basically the same; the app is better for price alerts and receiving verification codes. But registration and Google Authenticator binding are less error-prone on the web. Suggestion: register on web, use the app daily.

Finally: One Checklist, Follow It Top to Bottom

Before signing up: ☐ Confirm you're on the official site ☐ Confirm the referral field shows BGOfficial ☐ Have your email and ID ready
Within 24 hours after: ☐ Bind Google Authenticator ☐ Set funding password and anti-phishing code ☐ Complete KYC at the top tier ☐ Verify the 20% fee discount
When depositing: ☐ Confirm both sides use the same network ☐ Small test deposit first
Before trading: ☐ One week on demo ☐ First live order as a limit order ☐ Futures position kept under control

發表迴響

會員登入